Reply To: Hotspot for boolean editing

Home Forums General discussions Hotspot for boolean editing Reply To: Hotspot for boolean editing

#4621
David Shorter
Participant

I don’t know if this helps but here goes….
! Name : silly.gsm
! Date : Saturday, 23 February 2019
! Version : 22.00
! Written by ARCHICAD

values “zPos” 0,0.2,0.4,0.6,0.8,1,1.2,1.4,1.6,1.8

if zPos =0 then penAttribute_1= 15
if zPos =0 then text2 .5,zPos,”t1″
if zPos =.2 then penAttribute_1= 16
if zPos =0.2 then text2 .5,zPos,”t2″
if zPos =.4 then penAttribute_1= 17
if zPos =0.4 then text2 .5,zPos,”t3″
if zPos =.6 then penAttribute_1= 18
if zPos =0.6 then text2 .5,zPos,”t4″
if zPos =.8 then penAttribute_1= 19
if zPos =0.8 then text2 .5,zPos,”t5″
if zPos =1 then penAttribute_1= 20
if zPos =1 then text2 .5,zPos,”t6″

unID=2000

HOTSPOT2 .5, 0, unID, zPos, 1:unID=unID+1
HOTSPOT2 .5,-0.1, unID, zPos, 3:unID=unID+1
HOTSPOT2 .5, zPos, unID,zPos, 2 :unID=unID+1

mul2 A/0.467201, B/0.467201
add2 0.233600530869, 0.233600530869
set line_type lineTypeAttribute_1
pen penAttribute_1
fill fillAttribute_1
poly2_b{5} 5, 3, 1, 3, penAttribute_1, penAttribute_2,
0, 0, 1, 0, 0, 1, 0,
-0.233600530869, 2.860781424079E-17, 33,
0, 1.430390712039E-17, 900,
0, 180, 4033,
0, 1.430390712039E-17, 900,
0, 180, 4033