Home › Forums › Problems and solutions in GDL › 3D modelling › Project2{4} unclear › Reply To: Project2{4} unclear
May 24, 2019 at 03:26
#4749
Participant
If your panel is made in the floor plan, to be used vertically you will have to insert a situational rotation in your 3D script as seen on this thread on ArchiTalk as it only cuts parallel to the x-y axis offset in the z axis.
Ling.
AC18-23 AUS 4006
Self-taught, bend it till it breaks.
Win7 | E5620 x 2 | 24GB | K2200