The first steps to GDL study Home › Forums › Problems and solutions in GDL › 3D modelling › The first steps to GDL study Search for: This topic has 1 reply, 2 voices, and was last updated 6 years, 3 months ago by Barry Kelly. Viewing 1 reply thread Author Posts September 7, 2017 at 19:11 #3526 Хорун СаодатовParticipant Hello! Help with GDL language study to the beginner) If there is video lessons, is ready to buy. Thanks in advance! September 8, 2017 at 03:37 #3527 Barry KellyParticipant Most people seem happy to start with the GDL Cookbook 3 by David Nicholson-Cole. https://www.nottingham.ac.uk/~lazwww/cookbook/CB_download/cookbook3download.html It is a bit old now but still relevant. There is also “Introduction to Object Making with ArchiCAD: GDL for Beginners” by the same author (again a little old but still good). https://support.graphisoftus.com/files/GSNA/Books/Object_Making.pdf Both of these are free resources. There is also a GDL Handbook from CADimage by Andrew Watson if that is still available – but that will cost you if it is. https://www.cadimage.com/Other-Products/gdl-handbook There is of course also the GDL Centre where you are now for this forum – follow the links at the top of this page. Barry. Versions 6.5 to 22 Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10 Dell Precision M6800 - i7 4700MQ @ 2.40GHz, 16GB RAM, AMD FirePro M6100 (2GB), Windows 7 64bit Author Posts Viewing 1 reply thread The forum ‘3D modelling’ is closed to new topics and replies.