Forum Replies Created
-
Posts
-
Hi Péter,
Thank you for your answer. After a while I discovered this by trial and error method. But I definitely make a revision of my code by your advice.Pavel Čapek
BIM ProjectHi Gergely,
Thank you for quick answer. This solution also cross my mind, but I wanted to avoid it (no perticular reason). But It is probably only way for automatization of the process.Thank you again.
PavelPavel Čapek
BIM ProjectHello Bruce,
I beleve, you also need to define values in parameters script.values “gs_ui_current_page” 1, 2
Pavel Čapek
BIM ProjectThank you Dominika,
Article is very helpful for me.Pavel Čapek
BIM ProjectHello Dominika,
Thank you for reply. I already read recommended thread, It was helpful. I will look forward for your post.Pavel
Pavel Čapek
BIM ProjectThank you. This is it.
Pavel Čapek
BIM ProjectHello Joachim,
thanks for reply. But this is not what I mean. Maybe my example bellow will bring some clarification to what I mean.put 1, 2, 3, 4 print(nsp)“nsp” gives me a number of values count => 4 not a sum of values => 10
Pavel Čapek
BIM ProjectHello, I respond on previous post.
If you need solution for AC19, let me know, because that is a lot different (and a bit more flexible).
Please let me know solution for AC19 and if I may solution for AC17 also.
Thanks, PavelPavel Čapek
BIM Project
