Lingwisyer GC

Forum Replies Created

Viewing 3 posts - 31 through 33 (of 33 total)
1 2 3
  • Author
    Posts
  • June 24, 2019 at 02:20 in reply to: Variable Mismatch #4789
    Lingwisyer GC
    Participant

    This is from my Master Script. Used to set minimum and maximum limits depending on the values set for other parameters.

    cc is a variable, the others are parameters.

    Ling.

    AC18-23 AUS 4006
    Self-taught, bend it till it breaks.
    Win7 | E5620 x 2 | 24GB | K2200

    June 20, 2019 at 03:24 in reply to: PROFILE REQUEST PARAMETER SCRIPT #4786
    Lingwisyer GC
    Participant

    Oh well… I was using it to calculate a maximum value and displaying that in the parameters for reference. Guess I will have to forgo that when using a complex profile.

    Thanks,
    Ling.

    AC18-23 AUS 4006
    Self-taught, bend it till it breaks.
    Win7 | E5620 x 2 | 24GB | K2200

    May 24, 2019 at 03:26 in reply to: Project2{4} unclear #4749
    Lingwisyer GC
    Participant

    If your panel is made in the floor plan, to be used vertically you will have to insert a situational rotation in your 3D script as seen on this thread on ArchiTalk as it only cuts parallel to the x-y axis offset in the z axis.

    Ling.

    AC18-23 AUS 4006
    Self-taught, bend it till it breaks.
    Win7 | E5620 x 2 | 24GB | K2200

  • Author
    Posts
Viewing 3 posts - 31 through 33 (of 33 total)
1 2 3